Music Hall mmf-1.5 – Wood Veneer – Turntable – Record Player – With MH Melody Cartridge – Wood Veneer

About the Music Hall mmf-1.5 – Wood Veneer – Turntable – Record Player – With MH Melody Cartridge:

The stunning mmf-1.5, with its superior S-shaped alloy tonearm, Music Hall Melody cartridge, 3-speed design, and built-in phono preamp, is a beautifully refined piece of equipment.

In the groove

From the first note to the final fade-out, the music hall mmf-1.5 will get your world going and your feet dancing.

The Full Picture

A built-in phono preamplifier allows you to connect directly to your existing system. A top-quality Music Hall Melody cartridge comes pre-assembled and precisely aligned.

Melody Cartridge

A top quality Music Hall Melody Cartridge comes pre-assembled and precisely aligned.

Speed ​​Control

A built-in speed control circuit ensures the accuracy of the mmf-3's 1.5 speeds.

Built-in Phono Amplifier

With a built-in phono preamp, you can connect directly to your existing system.

Dust cover

The included hinged dust cover keeps your mmf-1.5 protected when not in use.

Feature List of the Music Hall mmf-1.5 – Wood Veneer – Turntable – Record Player

• gorgeous real cherry wood veneer
• built-in phono pre-amplifier which is by-passable if plugging into an existing phono pre-amp
• S-shaped aluminum tonearm, 9″
• removable headshell for easy cartridge changing
• low-noise belt-drive design
• stiff and solid MDF plinth
• separately isolated DC synchronous motor for superior speed stability
• three-speed motor provides 33⅓, 45, and 78 rpm
• properly aligned and mounted Music Hall Melody ($75 value) moving magnet cartridge
• adjustable electronic speed control
• special vibration damping feet
• high quality gold RCA connectors with detachable phono cable included
• full-size aluminum platter and special vibration damping platter mat
• worldwide compatibility
• excellent instruction manual
• dust cover and 45 rpm adapter
• quick and easy to assemble

General information

• power supply: DC12V, 2.0A – universal power supply
• consumption: 4W
• dimensions: 17.1(W) x 14.5(D) x 5(H) in. – 435(W) x 367(D) x 127(H) mm
• weight: 12 lbs. | 5.4 kg

Turntable

• type: 3-speed full manual
• motor: DC motor
• driving method: belt drive
• turntable platter: 305mm dia. aluminum die cast
• speeds: 33 1/3, 45, and 78 rpm
• wow and flutter:
  • typical: less than 0.1% WTD at 3KHz RMS(CD-4005)
  • limit: less than 0.15% WTD at 3KHz RMS(CD-4005)
• S/N ratio:
  • TYPICAL: More than 65dB (DIN-B) (SS-4242)
  • LIMIT: More than 62dB (DIN-B) (SS-4242
• speed tolerance: 3000Hz +/-1%(CD-4005)

Cartridge Section

• type: moving magnetic cartridge
• stylus: diamond stylus
• channel separation: more than 15 dB at 1KHz (CD-4005)
• channel balance: within 2.5 dB at 1KHz (CD-4005)
• phono output level: 1.5~3.6 mV at 1KHz 5cm/sec (CD-4005)
• line output: 90-216 mV at 1KHz 5cm/sec (CD-4005)
• RIAA: 20Hz~20KHz: +1/-3 dB

Music Hall mmf-1.5 Cartridge – Wood Veneer – Turntable – Record Player

• cartridge: music hall melody
• output voltage: 2.5mV +/- 3dB at 1KHz 3.54cm/sec
• channel separation: measurement point 1KHz over 18dB
• channel balance: 25 dB or less at 1KHz
• frequency response: measurement point 10KHz / 1KHz 0 +/- 3dB
• tracking force: 2.0 +/- 0.5 grams

Tonearm

• type: static balanced S-shaped
• effective arm length: 230mm
• overhang: 15mm
• offset angle: 22 degrees
• tracking error angle: 3 degrees or less
• stylus pressure adjustment method: rotation movability (1-rotation 4g)
• applicable cartridge weight: 5~8.5g (including headshell 15~18.5g)
• anti-skating adjustment range: 0~3g
• arm lifter: oil damper type
• height of stylus: 8~10.5mm
• lifter descent time 1.5~3 sec (stylus pressure: 2g)
• horizontal sensitivity: less than 0.2g
• vertical sensitivity: less than 0.2g

View this product on the manufacturer's website.

View all record players.